You might have heard of Habitat for Humanity, they “provide decent and affordable to low-income families around the world”, but have you heard about the Habitat for Humanity ReStores? Well I’m about to blow your mind because if you like thrift stores or are in the market for some new doorknobs the “Habitat for Humanity ReStores are nonprofit home improvement stores and donation centers that sell new and gently used furniture, home accessories, building materials, and appliances to the public at a fraction of the retail price.” Find one in your area HERE.
The Restore in my area recently moved to a new location and my dad and I went to go check it out because he needs another filing cabinet. Let me take you on a little tour.
Art for all tastes.
Need a light bulb? washer? dryer? microwave?
I went to the Azusa location so if you see something you like, and you are in the area, then I highly recommend you get over there ASAP!
A little side note: Since the stores are donation based you never know what you are going to find, last time I was at ReStore I found a vintage Polaroid Land Camera with flash for $5 bucks…It was a very exciting day for my vintage camera collection.
Some of my current top five favorite pins from the wonderful world of Pinterest on this beautiful Saturday.
Stina Persson’s Watercolor’s are inspiring me to actually try out watercolors.
Kelsie over at Cut Craft Create is inspiring me to make my own world map version of her personalized photos map from her paper anniversary.
Michael Badt’s Flickr photo stream of his adventure through the streets of Chefchaouen in Morocco makes me wish I had the chance to visit when I was there.
The ladies at My Sister’s Suitcase are reminding me that my love of sequins is not strange at all.
(None of these images are mine, they belong to their respective owners and you should definitely click through the images and discover some wonderful talent!)
Today I have a very simple houseplant project using Heartleaf Philodendron cuttings and test tube shot glasses.
For this simple windowsill test tube vase project you will need:
I am using Heartleaf Philodendron.
You will need to cut small enough cuttings off of your plant in order to stick out to your desired length. When you have cut the stems scrape off a small section of the tip and dampen with water. Dip the damp stem into the rooting powder and drop into the test tubes and fill with water. Refill the water as needed.
I’m going to be honest, I bought these test tubes on sale at Urban Outfitters with the intention of doing something like this, I wish it was because I had some crazy mad scientist party planned but alas I did not, I am just obsessed with propagating philodendron.
I love Philodendron for two reasons; the first being that it is very hardy, it really just needs some sunlight and water (added bonus it tells you when it needs water by getting droopy). The second reason is that propagates well, if you have two or three plants you will have unlimited cuttings because it grows super fast and gets real leggy.
I’ve had these little guys in their tubes for a few weeks now and they are happy as clams (if clams were plant cuttings living in water and sun).
What simple houseplant projects are making your home bright?
Here in Southern California we are experiencing “Sinter”, spring going by the name of winter. The weather doesn’t know what it is doing half of the time, one days it’s cold the next its almost hot…now I’m not complaining because I’d rather this than snow any day (sorry everyone else in the country) but regardless I want to wear my cute boots because the calendar says February and it is my right to wear cute boots in “winter” (even is it is too warm).
The idea for this DIY was sparked by my boots spooning each other in my closet, now spooning may be appropriate in some situations but never when it comes to my boots.
I have been scoping out boot shapers for some time now and I have been unable to bring myself to spend $10 (or more) on things that I knew I could make. Today inspiration came to me while I was pondering my spooning boots, I could use the packing pillows from all of my amazon purchases which I just didn’t have the hear to throw out!
With that spark this DIY was born, enjoy!
You will need:
A Sewing Machine
Side note about the fabric: It was on sale at Ikea for $25 for an ENTIRE bolt of fabric…so now I will probably use this fabric for every functional sewing DIY I make (my kitchen curtains are already made from it).
Steps 1 and 2: Fold your packing pillows in half (if you have the individual perforated kind) and duct tape one end.
Steps 3 and 4: Put the untaped ends together and tape around the middle.
Your stuffers are done, you can stop here if you don’t feel like sewing…but it will be quick I promise.
Step 5: Cut 2 strips of fabric about 28 inches long and 6 inches across.
I kind of guesstimated these measurements based on the size of my stuffers…it’s not exact but it works.
Step 6: Sew up the two long ends of your covers.
Now you may be thinking that you are making long skinny pillows…and you would be right.
Steps 7 and 8: Admire your freshly sewn covers and flip them right side out.
Steps 9 and 10: Put your stuffers into the cover and sew the ends.
Now your boots won’t be caught spooning in your closet!
This DIY came on a whim…and I have to admit that I was making it up as I went along. The necessity for this little mount arose when I signed up for the new app: Vine…where you create super short videos which are almost like gifs. I needed a way to keep the phone in the same position the entire time so I made this thing.
Of course you can buy a real mount but why do that when you already have the supplies laying around (unless you threw out your iPhone box…oops). The project is simple enough it just takes a little bit of time and precision.
Find me on Vine!: MintGypsy
You will need:
-the dividers from the inside of your iphone box
-a tripod (or just the mount part for the purposes of this project)
-tape (I went with white electrical tape for aesthetics)
-duct tape (or equally thick and strong tape)
-non skid stuff
-a rubber band (the thicker the better)
Step 1: Take the innerds of your box and prop your phone up against the lip with the most amount of material sitting in front of it. Mark a line where your phone ends.
Step 2: Do the same thing on the other side.
Step 3: Cut as straight and smoothly as possible along the line you just made.
Step 4: Take a piece of the tape and place it on part you just cut with a little tape hanging over the edge.
Step 5: Take your smaller piece and place right on top of your larger piece make sure to fold the extra bit of tape so it butts up against the lip of the larger piece.
Step 6: (optional) Tape up the raw edges so it looks a little better.
Step 7: Take your non skid and measure out two pieces that will fit snugly in the underside of lipped box innerds.
Step 8: Tape the first piece directly into the underside.
Step 9: Take two small pieces of duct tape and place them directly onto the first piece of non skid. Attach the second square to the duct tape.
This is to make the underside thicker so it sits more flush to the tripod…the non skid helps it stay in place.
Step 11: Cut a small piece of non skid and a piece of duct tape and put them between the two lips.
Step 12: Attach your new mount to the top of your tripod with your rubber band.
Step 13: Insert your phone.
Step 14: Start taking pictures!
Now as with most of my camera DIYs this little mount will NOT win any beauty contests but it will serve its purpose!
This project came to me on a whim because I could only find one of the black shoelaces for my “Foc Fartins” (fake Doc Martins) and I have an excess of velvet scraps.
For this project you will need:
2 strips of velvet cut on the bias (the stretchiest direction of the fabric)
about 15 minutes
My strips were about 26 inches long and about 2 inches wide…but you can make them as long as you like but I wouldn’t suggest a thinner width than 1 1/2 inches for the velvet because the thinner it is the quicker it will fray down to velvet dust. Also, the thicker width will allow the velvet to fold under itself so there is no sewing necessary. woohoo!
Step 1. Make sure the ends of the velvet are cut straight across.
Step 2. Rip a piece of duct tape for the aglets (the ends of the shoelaces…you learn something new everyday!)
I actually ripped my duct tape square into two thinner strips because I wanted thinner aglets.
Step 3. Roll up the ends of your velvet as tight as you can and wrap the duct tape around the end.
I only used half of the strip because I did not want the aglets to be big fatties. You will have to eye it depending on how large your grommets (shoelace holes…see you are still learning) are.
Step 4. Wrap the other side.
Step 5. Lace yours shoes back up.
(The velvet is black but for some reason whenever I photograph velvet close up it confuses the camera.)
Step 6. Admire your handiwork.
For my birthday I received a Fujifilm Instax Mini Camera, it is basically a Polaroid camera that takes credit card sized photos. For Christmas I received a Holga Macro Lens Kit for my Instax camera…because I really need more ways to take a picture.
I was so excited to try these little lenses out but unfortunately ALL of the pictures I took were terrible blurry messes (and the film is not very cheap)…so after being sad for a bit I decided to search the interwebs for solutions and what I found was an overwhelming warning to measure the distance of from your lens to the subject which sounds simple enough…but who has a ruler handy all of the time?
This problem gave birth to my super simple solution and hopefully if you have the same niche problems that I have then this simple DIY will save you heartache and money.
To solve your distance problems you need to first figure out exactly how far each lens will allow you to be (I wrote the distance in silver sharpie on each lens…in inches because I am american and I was taught to reject the already given millimeters.) You will then need to rustle up:
1. A measuring tape (preferably plastic coated)
Step 1: cut your measuring tape a little longer than your longest distance lens…mine is 19.68 inches so I cut the tape at 23 inches.
Step 2: Tape it to the bottom of your camera making sure that the tape crosses over the middle of your lens.
Step 3. Find things to photograph.
When I need to use less measuring tape I just hold the right distance to the bottom of the camera, measure out the distance and then drop the tape.
Boom! And now you don’t have to worry about wasting precious film on blurry messes!